Tag Archives: procurement

Retro Air Force Procurement II: Lightweight Fighter Edition

Posted by

It’s time for another classic showdown. Let’s look at two competing lightweight fighters. Specifically, the F-16 Viper and the F/A-18 Hornet. We’re going to keep this fair, so we’re generally looking at older Vipers, from back when both were in production. For a mid 90s procurement challenge, we’re going to have the F/A-18C/D Hornets go up against the F-16C/D Block 50/52 Vipers.

The F-16 was the fighter that (re)popularized the light fighter concept. It’s relatively small, has one engine, and a reasonable amount of capability. For a western fighter, it’s pretty cheap too. One engine means that the maintenance and support costs are going to be lower. Plus, it’s engine is common with that of the F-15, which is awesome if you operate the bigger type. It has possibly the most cockpit visibility ever. It can do any mission you please. It’s great.

The F/A-18 Hornet brings something a little different to the table. It’s got two engines, a navy-grade undercarriage, and some really fancy avionics for the time. The Hornet was small and advanced, but it cost more both to buy and to maintain. It’s also multirole, and was the first aircraft to shoot down enemy aircraft with missiles and complete a bombing mission on the same sortie in the Persian Gulf War. It’s also got great cockpit visibility.

So let’s break this down:

  • Cost: Viper. Duh. Viper is cheaper to buy, cheaper to fly. Has just the one engine. And it’s the same engine used in the F-15, which is a big bonus if you also operate Eagles, because then you don’t need to add another engine’s parts to the support list. And we do operate Eagles.

Looking at FY98 prices for both (using total program cost for each, because that’s what I happened to find), Vipers will run $26.9M and Hornets will run $39.5M.

  • Cockpit Systems: Hornet. The Hornet has three displays compared to the Viper’s two, and they’re bigger displays at that. The Hornet can run a moving map display too, which is really cool.

  • Engine Power: Viper. Even though it only has one engine compared to the Hornet’s two, the Viper has a lot more thrust, and a pilot can use this thrust to get out of trouble. Or take off quickly.

  • Low-Speed Handling: Hornet. The Hornet is a fantastically high-alpha jet. It performs well at low speeds and high angles of attack, so it’s a great turning dogfighter.

These two previous points mean that while the two aircraft fight very differently, they’re both very capable machines. Practical dogfight capability is a draw.

  • Targeting Pods: Viper. Both aircraft have access to the full range of NATO FLIR targeting pods like LITENING, which use infrared-spectrum cameras and lasers to identify targets. However, the Viper can also mount the ASQ-213 HARM Targeting System pod, which allows for identification of type, bearing, and most importantly range of enemy radars. Accurate range data allows the AGM-88 HARM to be used more effectively.

  • Weapons Fit: Tie. Both aircraft can operate a wide variety of ordinance, with no significant differences between the two.

  • Jamming Systems: Tie. Mostly because both can mount modern ECM pod options, and those are a pain to compare with unclassified data. So we’ll call it a wash.

  • Towed Decoys: Viper. The Viper can be equipped with the ALE-50 towed decoy system. While the bigger Super Hornet can also be so equipped, the standard Hornet cannot.

  • Naval Capability: Hornet. If you want to operate your fighters off of carriers, the Hornet is CATOBAR capable and the Viper isn’t.

  • Twin Engines: Hornet. Lots of Hornet export customers like the twin-engine reliability, since they have big, foreboding, sparsely-populated regions. Like with Naval capability, if this is important to you, the Hornet gains points.

  • Radar Range, Track Fighters: Viper. Based on totally shady open-source materials, I’ve found the maximum radar range to track a small fighter to be 80 km for the Block 50/52 Viper (with the APG-68(V)7 radar) and 72 km for the F/A-18C Hornet.

  • Radar Range, Track Bombers: Hornet. The same source gives the F/A-18C Hornet a maximum radar range to track bombers to be 150 km and the Block 50/52 Viper with APG-68(V)7 radar a maximum tracking range of 140 km.

  • Recon: Hornet. The Viper requires a camera pod for reconnaissance missions. The Hornet can replace the gun and ammo package with a reconnaissance camera package,

  • Pending Upgrades: Viper. In the above, I’ve compared what was flying in 1998 for both aircraft. However, both Greece and Israel were looking to buy some Vipers, and a number of improvements were offered. Specifically, the Apg-68(V)9 radar and removable conformal fuel tanks were available for F-16s ordered in 1998, and both of these features were purchased by the Israelis.

Okay, so where do we come down for Borgundy? We’re going to go with the Viper. The Viper provides excellent multirole capability while also being relatively low cost to purchase and operate. As a bonus, it can have common engines with our Eagle/Strike Eagle fleet. In the late 90s, the Viper is not only super popular in the export market, but it also continued to see development. It does a good enough job at everything we’d like it to do, while also being cheaper than the competition. It’s superior SEAD functionality is a bonus, as we take that mission seriously.

Note that while I picked 1998 as the year for this, mostly because I had price data for that year, the conclusion is similar for other Hornet/Viper matchups of similar vintage. The key differentiators that would push for a Hornet buy are naval aviation (or a naval/land common fighter project) or large remote spaces that would lead to a favoring of a twin-engine design. Neither of which applies for Borgundy, unless the United States wanted to sell one of their (likely conventional powered) carriers to us as well.

On Army Shotguns

Posted by

Shotguns are curious weapons. While they are possessed of limited capacity and are a pain to reload with any kind of speed, they have a number of useful features. While they were terrifyingly deadly in the trenches of World War 1, these days they tend to be specialized weapons, often using breaching rounds. Let’s talk about some of the different kinds of rounds one might want to shoot through a shotgun in a military context, and then we’ll talk models of boomstick.

Buckshot
Everyone’s favorite close-range manstopping load. Contrary to popular belief, you do need to aim with buckshot, and it will not send a man flying. Seeing as it consists of 9 pellets, each about .33″ in diameter, it will do an excellent job of ruining a man’s day.

Slugs
Hunters know there are a lot of fancy slugs out there for specialized purposes. The military guys tend to stick with pretty boring slugs. They’re still 0.72″ in diameter, and they’re absolutely great for wrecking stuff.

Breaching rounds
While buckshot and slugs can be used to smash the daylights out of hinges and locks, there’s a significant ricochet hazard. Breaching rounds are made from sintered metal pressed together, and are designed to safely destroy door hinges or locks with no risk of ricochet injuries.

Now, let’s get on to the guns themselves, and bring up Questions of Procurement. Let’s first note the obvious absence above: there are no “less lethal” rounds listed. This is notable mostly because it drives the constraints on our firearms. “Less lethal” rounds like beanbag rounds and rubber bullets don’t have enough of a propellant charge to reliably cycle most semiautomatic shotguns. The semiautomatic shotgun would then have to be manually cycled. While this is doable, if this is a key consideration then a pump-action shotgun is going to work better.

With any manually-operated shotgun, the onus is on the operator to not screw it up, and this is annoyingly easy to do. In general, absent a strong need to run less-lethal loads or a very severe budget restriction, the semiauto shotgun is the better choice, because it means there’s one less thing for the shooter to think about. There are few enough shotguns on the market that it suffices to ask a few more features questions, and that will determine our weapon.

First, let’s look at operating systems. Semiautomatic shotguns are either inertia-driven or gas-operated. Both can be reliable if well made. The simplicity and lighter weight of the inertia-driven options make them extremely popular with sportsmen. However, inertia-driven shotguns have the weight of the gun as one of the key parameters for their operation. So, adding weight to that gun, say by adding the lights, lasers, and optics that usually come on military weapons, can make them less reliable. For this reason, we’ll stick to gas-operated models.

Let’s next talk of magazines. Due to the nature of the (usually plastic) shotgun shells, making a reliable detachable box magazine fed shotgun is tricky. There are some who do it right now, namely Saiga and Molot.1 Both of these are Russian, and we run into the usual issues of NATO and politics. We might also expect Remington and Mossberg to introduce some new models of their respective Versamax and 930 shotguns to take advantage of the detachable box magazines which they have introduced on their respective model 870 and 590 pump-action shotguns. However, these are not yet out, and we in the Borgundian War department do not like to be beta testers. I would also honestly wonder if a more traditional, integral, tubular magazine fed shotgun would not be preferred for its extra handiness, since the shotgun is a specialized secondary weapon in military service.

Given the above, the choice is pretty obvious: the Benelli M4 (known in US Service as the M1014). It is highly reliable and tolerates long firing schedules and the general abuse of service well. We will make a few further catalog stipulations. Specifically, we’d like to opt for the M4 Entry model and the factory, three-position, collapsible stock. The three-position stock allows for easier use for those wearing body armor. The Entry model has a 14″ barrel, instead of the 18.5″ barrel on the standard model. Given that the shotgun is a secondary weapon, and the breacher also carries a carbine, we would expect the reduced weight and length to be preferable. Postulating a magazine tube of equal length to the barrel, this will also reduce capacity from 7+1 to 5+1. Again, because this is a secondary weapon used for special purposes, the loss of capacity is not a major issue.

  1. Of the two, Molot seems to have better QC. In both cases, competition shooters tend to tune the guns extensively, though a good deal of that is due to wanting to run their shotguns with the cheapest ammunition in Walmart. ↩

Resurrected Weapons: XM2001 Crusader

Posted by

Crusader was a program to replace the M109 Paladin self propelled howitzer in US Army service. It had a number of innovative features, but development issues and changing army requirements would doom the project. It also happens to be one of my favorites, so let’s take a look.

Crusader was originally a part of the Armored Systems Modernization (ASM) program, as the Advanced Field Artillery System (AFAS), with its companion Future Ammunition Resupply Vehicle (FARV). These were two fifths of the ASM program, with the other three parts being the Block III MBT, the Future Infantry Fighting Vehicle, and a Combat Mobility Vehicle. The fall of the Soviet Union led to ASM being restructured, and only the AFAS and FARV components would get significant development funding in the 90s.

The most important part of any artillery piece is the gun, and Crusader’s was unique. Originally (around 1991), the US Army had settled on using an innovative liquid propellant gun, but this had considerable and persistent teething problems. This gun was (clearly) an entirely different beast than previous systems and by 1996, the delays were becoming intolerable. Tired of the issues, the US Army re-engineered Crusader to use a conventional, solid-propellant gun, albeit one with modular propellant charges. This would be the first major revision that would drive the program costs through the roof.

The new gun used relatively conventional modular (solid) propellant charges, but still had some fancy new features. It had a very long L56 barrel and a liquid cooling system. The barrel had a jacket for isopropyl glycol, and there were a pair of heat exchangers in the turret to keep the gun cool. This would allow for higher rates of fire and better accuracy, since the gun wouldn’t have to deal with as much thermal expansion. As a result, Crusader could fire up to 8 rounds in a MRSI1 fire mission, and be capable of sustained rates of fire of 10-12 rounds per minute. Both of these figures are class-leading.

An additional feature helping Crusader get this rate of fire was the ammunition handling system. The crew of three men were completely isolated from the ammunition. Loading shells, setting fuses, loading propellant charges, and setting primers were all accomplished by an automatic loader system. The Crusader prototypes had two 30-round magazines, and each magazine carried its own set of propellant charges.

Resupply was handled by the XM2002 (the FARV). This vehicle could refuel and rearm XM2001 with a full set of 60 shells and 270 charges in under twelve minutes. Each XM2002 carried a double load of shells and charges. Fuel was transferred at a rate of 29.5 gallons per minute. The reloading port on the XM2001 could also handle manual loading of shells and propellant charges.

Crusader also had a new gas turbine engine. This was the LV100-5, which was also intended to be used to re-engine the US Army’s Abrams fleet. The LV100-5 had 25% less fuel consumption than the AGT-1500 while moving, and 50% less fuel consumption when idling. It was, of course, less fuel efficient than a diesel engine of similar power and vintage like the MTU 883.

Originally, Crusader weighed in at 60 tonnes. By the early 2000s, the US Army’s “Ever Lighter” fetish was in full force, and Crusader would be redesigned again with the goal of making it more air transportable. The goal was an air-transportable weight of 40 tonnes. To accomplish this, the XM2001 was redesigned to have a pair of 25 round magazines instead of a pair of 30s, with a corresponding reduction in propellant charge module storage. The armor was redesigned to be lighter, and to be an easily-removable set of modules like what was on the Puma. The power pack was also redesigned. This yielded a combat weight of 50 tonnes and the target air-transportable weight. But while a C-5B could now carry two Crusaders, Congress balked at the ridiculous unit cost. The program was eventually terminated in favor of the self-propelled howitzer portion of the Future Combat System, which would be no more successful.2

And now, what do I think? Well, I really like the Crusader, even if it is a classic American attempt to pack too much innovation into one can. The core concept of fully automated ammunition handling, isolated from the crew, is a great one, and one that I buy into. I could even get behind the liquid-cooled gun, though I would be just as happy if the “A0” version had a conventional gun, with plans to add the liquid cooling later. I also kinda like the LV100-5 engine, though again I would be content with an MTU 883. I think the version of choice is what the early 2000s prototypes were: 60 tonne beasts that could outgun anything on the battlefield. I have no desire to cut any weight from the program.

Verdict: Funding Approved by the Borgundy Army Armor Development Board

  1. Multiple Rounds Simultaneous Impact. ↩
  2. Thanks a lot, Shinseki and Rumsfeld. /sarcasm I really, really hate the “super light future army” nonsense, but that is a rant for another time. ↩

Configuring a Leopard 2 for Borgundy

Posted by

As mentioned previously, the Leopard 2 has a ton of available upgrade options. So let’s go to our local KMW Dealership and select our optional extras. Since I’m sticking with various catalog options, I’ll list the model or project where you can find the option.

We’ll start with the turret, since there are a few different configurations available. There are basically no old stocks of Leopard 2A4s that people are looking to part with, so we’ll have to go with new-build units. We’ll also select the gunner’s sight mounting above the horizontal axis of the main gun, as on the Leopard 2A5 and subsequent models. We’ll also opt for the lengthened turret bustle, as seen on the Strv. 122 and some other exported models. We’ll also opt for the electric turret drive for both traverse and gun elevation, again, as pioneered on the Leopard 2A5.

One of the key things that got the Leopard through our gauntlet of armchair1 testing is the gun. We’ll opt for the Rheinmetal 120mm L55A12 smoothbore, the finest gun in the west.

Now, let’s talk armor. As always, we’re using the best and latest composites. Our inserts will be those of the German Leopard 2A7. We’re going to opt for the standard 2A5+ wedge applique on the turret front. We’re also going to take the roof protection kit that the Swedes got on the Strv. 122. We’re also opting for a glacis applique package, again with those modern composites. We’ll add the armored housing for the commander’s sight that’s popular on some of the later export models, including the Strv. 122. And of course, we’re going to opt for spall liners.

We’re not done. There are a bunch of other supplemental packages that we can add or remove as needed. There’s a mine protection kit that was first seen on the Leopard 2A6M. There’s no good reason not to get the belly plate these days. And then there’s the flank protection. The skirts come in two sizes, with the older ones being about 150mm thick and the newer ones about 325mm thick. We’re going to take the newer, thicker ones. We’ll also take advantage of the mounting points on the sides of the turret in the newer Leopard 2 models to mount some nice AMAP modules for side protection.

Our armor changes listed above will necessitate some other, minor structural changes. The roof protection setup means we’ll need to redesign the hatches on the turret roof. The new ones are slide-opening. Again, this can be seen on the Strv. 122 or the Leopard 2HEL. We’ll also opt to add the roof storage boxes for the crew’s carbines that the Danes opted for on the Leopard 2A5DAK. Internally, we’re going with shock mounts and a protective kevlar cover for our ammo rack. This will protect against splinters and provide some measure of blast dampening, but will reduce reserve ammo capacity from 27 to 21 rounds.

On to the sensors! For the commander, we’ll select the PERI R17A3 sight, which comes with the Attica GL 3rd Generation FLIR system and an eye-safe laser rangefinder. This is a pretty standard addition on the Leopard 2A7 and related models. We will also put the Attica GL into the gunner’s sight, replacing the older WBG-X FLIR. We’ll also take the opportunity to upgrade to an eye-safe laser rangefinder for the gunner. Further, like the Leopard 2HEL, we’ll add a crosswind sensor for improved targeting system efficacy.

We are not done. There are many more internal systems to pick. We’re going to go back to the Bundeswehr’s A7 and A7V for some of the other systems in the turret, specifically the ultracapcitors and the integrated air conditioner/NBC system. These are in the right rear portion of the turret bustle, replacing the turret hydraulics on older model Leopard 2s. We’re also going to use the upgraded Steyr M12 APU, capable of generating 20 kW. We’re going to round out the electronic systems suite with a battle management system and the SOTAS-IP Communication system.

Because RWS are the hot, not-so-new thing, we’re going to fit one, namely an FLW 200 RWS with an M2HB heavy machine gun. This will replace the loader’s machine gun mounted on the roof.

We’re also going to select a few extras to provide more protection. These are Saab’s Barracuda multispectral camouflage system and Rheinmetall’s ADS Gen 3 active protection system. Barracuda makes the tank harder to spot visually, and reduces the thermal signature. And ADS is a fast-reacting, relatively3 safe for nearby infantry active protection system to intercept those pesky rockets.

And there you have a Leopard 2A7 BOR model. It’s pretty great. I’m also going to talk briefly on support variants, since the Leopard 2 has several. We’ll want an armored recovery vehicle and an armored bridgelayer. For bridging, we’ll go with the Panzerschnellbrücke Leguan, and for armored recovery, we’ll go with the Wisent 2. The Wisent 2 also comes in an armored engineer vehicle version, and we’ll buy those as well.

  1. It’s a very comfortable armchair. ↩
  2. Ordered by the Bundeswehr and in production as this goes to press, so I can have some too. ↩
  3. Still dangerous, but tests show an ADS interception of an RPG-7 rocket is less dangerous than the detonation of said RPG-7 rocket. ↩

More on the Namer

Posted by

We picked the Namer as our IFV of choice. But I have more to say about it, and a few things I might like to tweak. First, let’s take a good look at the turret.

namer ifv turret

This is from a presentation, so it’s a trifle incomplete. We can see most of the mechanisms though. Note that the popup missile launcher has a pair of MATADOR rockets installed here. These could also be Spike 2 ATGMs. There’s also no indication (at this stage) of an autoloader for the Trophy install, or any indication of the autoloader assembly for the mortar.

Still, it’s a great turret. I really like the firepower in the Namer IFV. We could debate caliber until we’re blue in the face, but 400 rounds of 30x173mm plus two rockets or missiles is very solid. However, I’m a good armchair strategist, and I can always find things I might like to tweak given the opportunity. We’ll go through these in order of ease of doing.

  1. Side skirts. The skirts on Namer aren’t very thick. Thicker skirts would help protect against incoming RPG fire better. Given the vehicle’s size, this is an obvious threat vector, so let’s armor up.

  2. Engine change. The Namer currently uses the AVDS-1790, which generates 1,200 hp. We also know the Namer is very heavy. The CEV version (which has Trophy but no turret) weighs 63.5 tonnes, and the turret is going to mean even more weight. To improve mobility, we’d like ours built with the MTU 883 engine, which makes 1,500 hp. This is the engine used on the Merkava 4, so this change should be pretty easy to do.

  3. Glacis work. Due to being a newer, liquid-cooled engine, the MTU 883-based powerpack is smaller than the one built around the AVDS-1790. A smaller powerpack means there’s more room for glacis armor, so let’s fill the void. There is no such thing as too much armor.

  4. APS change. I like Trophy. It’s combat proven. But IBD Disenroth1 has a system called AMAP-ADS. The Gen 3 version reacts considerably faster than Trophy (0.56 ms for ADS compared to 300-350 ms for Trophy). In Swedish tests, ADS also has a smaller danger space for nearby infantry. Further, in the turret picture above, we note a lack of reloads for Trophy. We can fit a whole bunch of ADS effectors on the Namer, and we’d like to do so.

  5. Additional missiles. Given the deletion of trophy from the turret, it might be nice to see if we could get more missiles in there.

  1. Now a subsidiary of Rheinmetall. ↩

MBT Roundup 2018 Addendum

Posted by

It appears that I have made a minor screwup, dear reader. In my 2018 MBT roundup, I neglected to come down on a choice for Borgundy. Also, I completely left out the Merkava 4. I will rectify them both here.

To make our comparison easier, it will help to pick a winner from our roundup. It is a tossup, and we don’t have much in the way of political or pricing configurations to throw in. But let’s break it down anyway. As far as I’m aware, the Abrams has never been offered for export with the depleted uranium armor. That said, it’s been offered with arrays of similar weight, so it shouldn’t be terribly worse off. Sweden’s testing showed that even with some supplemental armor on M1A2, Leopard 2A5 had overall better protection. Abrams could also really use a gun upgrade or else we’d be stuck hoping the US will sell their latest antitank rounds. The Abrams has been fitted with an L55 gun, but there were stabilization issues and the US Army hasn’t paid to fix them yet with a new stabilizer. We could, but that violates my COTS rules. So the Abrams is out.

My COTS rules also give the Leopard 2 the win over the K2, though here it’s much closer. The superior gun and some of the available protection options make the Leopard the better buy given the rules I have set for myself. Clearly Samsung Techwin could work up a solution and present it for evaluation (fixing the gun problem is pretty simple, really), but as I am limited to armchair analysis, I have to make do with what I have. The K2’s lack of a good top-attack armor protection solution is problematic, as is its acceptance of more weaker zones on oblique shots in the pursuit of less weight. So the Leopard 2 is our champion.

Let’s now throw the Merkava 4’s hat into the ring. I know it hasn’t been compared in any trials, but that’s part of the fun. I’m pretty confident the Israelis would export it if someone asked. The Merkava is a big, heavy, generally well-protected tank with some unique design features. These features are based on Israel’s experience in the Yom Kippur war, among others. These features include a front-mounted engine, door at the rear of the hull for easy resupply, removable ammo racks at the rear of the hull to allow the Merkava to evacuate soldiers, and a 60mm mortar in the turret.

The Merkava 4 has a 120mm L44 smoothbore gun. The MG253 on the Merkava 4 has a longer than standard recoil length, and should be able to take higher pressure ammunition. As far as I am aware, the Israelis do not use depleted uranium in their APFSDS rounds. Admittedly, they don’t have much in the way of modern armor threats to prepare for these days.

On to the comparison. I would expect the Leopard’s L55 gun to be able to get better penetration than the L44 gun on the Merkava, even with enhanced ammunition in the Merkava. I would certainly expect the L55A1 gun to do better. Advantage Leopard.

In terms of protection, it’s hard for me to adequately gauge protection levels. Merkava 4 seems to have better protection on the sides and roof of the turret. It also seems to lack wide skirts like those available on the Leopard 2. Also, the Israeli armor arrays are optimized towards the threats they face, which tend to be lots of ATGMs, and not much in the way of APFSDS threats. We’d expect Merkava, with all of its heavy side and roof protection and very large frontal profile to be less well protected towards the front.

I’d also like to talk a little about ammunition stowage. The Leopard 2 has 15 ready rounds in the rear of the turret. There’s another 22 or 27 (depending on version) rounds stored in the front hull, next to the driver. This provides good protection across the frontal arc, but does leave the ammunition vulnerable to side hits. No blow out panels or bulkheads are provided. The Merkava 4 has ten ready rounds in a pair of drums which can present rounds to the loader. Remaining rounds are stored in cases at the rear of the hull. These can be removed to facilitate evacuating wounded. There are no bulkheads or blowoff panels for the Merkava’s hull ammo storage either. Given its location, the ammo storage on the Merkava is vulnerable to side hits as well as wider-angle shots from the front arc that penetrate the side armor and hit the front of the storage area. It’s a small thing, but I prefer the storage arrangement on the Leopard 2. I also prefer the Leopard 2’s larger ready ammo supply.

Merkava 4 has an in-production active protection system. The Leopard 2’s has been trialled, but none have been ordered yet by Germany. At least one user has placed orders, though.

Overall, I think the Leopard 2 is the better buy. It’s better suited for tank v. tank combat, which is the first mission of Borgundy’s MBT Corps. Leopard 2 has the better main gun. It has very good frontal armor, and adequate side protection considering that we do not expect to fight an irregular war with extremely well equipped terrorists.1 Plus, the Leopard 2 has a number of available configurations, and is more easily tailored to the customer’s needs. Additionally, it’s protection is more forward oriented. And of course, Leopard 2 has a ton of excellent upgrades available.

  1. I.e. we are not fighting Hezbollah anytime soon. ↩

Fitting Out a Fantastic Burke

Posted by

The Arleigh Burke class guided missile destroyers are the best exemplar of the type currently at sea. They are among the few truly multirole ship classes, able to perform any duty one might reasonably ask of them. Despite the design approaching its thirtieth birthday, the US Navy is continuing to build them, and they’re reasonably popular on the export market. With such a long life comes plenty of upgrades and options, so let’s see how we’d fit one out. DDGs, nicely equipped. One small note before we dig into this: I’m going to limit myself to features proposed or actually fitted to Arleigh Burkes, not hypotheticals like putting the SPY-3 radar on one.

Hull Variations
First, we have some decisions to make about the hull form. We’re going to take what I’ll term the “large form” hull, which was originally designed in the early 90s as the “Flight III” variation.1 This version was cancelled, but the design got used in the South Korean variation of the Arleigh Burke, the Sejong the Great class. This means an increase in length of 32 feet 4 inches, an increase in beam of 4 feet 3 inches, and 32 additional VLS tubes, for a total of 128.

Radar Systems
The radar is a critical system on a DDG. A long range radar allows for the tracking and engagement of multiple targets, which is important for the survival of the ship, plus any others she’s escorting. Radar is key, so we’re going to get the best and latest: AN/SPY-6. SPY-6 is an actively scanned phased array, unlike the passively-scanned SPY-1D fitted to most Burkes. The SPY-6 is more sensitive, can track many more targets, is more resistant to ECM, and might have the possibility of being a jammer in its own right. Super cool. It also provides solid ballistic missile defense capabilities.

But that’s not enough. While the big SPY-1/SPY-6 radar is the most prominent, there are other radars that complement it to provide better capabilities for the Aegis Combat System. A new and fancy radar is in the pipeline to compliment the SPY-6, but development hasn’t been completed yet, and the initial Flight III ships will start with integrating only the new SPY-6. Currently, the standard companion radar is the AN/SPQ-9B. It’s an X-Band suite optimized for tracking ships and low flying aircraft2 in littoral regions. It can also provide terminal guidance. I would like to see a more advanced system replace the SPQ-9B, but I’m very happy the US Navy is upgrading one system at a time.

CIWS
Burkes have been fitted with most western CIWS. Phalanx, Goalkeeper, RAM, and SeaRAM. We’re going to focus on the missile-based systems, since I’m a huge fan of the RIM-116. The choice comes down to launcher. The Mk. 49 GMLS has a 21-tube system, but requires external fire control information for cueing. The SeaRAM system has a capacity of 11 missiles, but comes with the radar and IR sensors used in Phalanx Block 1B, so it’s completely autonomous. Personally, I think I prefer the Mk 49, given that we already have an excellent radar suite. However, I could be swayed if the data exists showing that a separate radar on the CIWS is the better bet.

Funnel Structure
No option is too small for us to consider. There are a few different funnel designs on the various Burke flights. We’re going to go with the newer design that extends the external funnel structure up to the level of the exhaust tops. This reduces signature a little, and every little bit helps. This particular design element was first introduced on USS Mustin (DDG-89).

RMS
The AN/WLD-1 Remote Minehunting System (RMS) is an unmanned underwater vehicle that allows minesweeping operations without putting the mothership at risk. Mines are a huge and underappreciated threat, and this is a welcome addition. Fitting the RMS requires some amidships structural changes to accommodate the launching, recovery, and storage of the UUV. Part of these are moving the triple 325mm torpedo tubes from the main deck amidships to the missile deck aft. These modifications can be seen on some of the US Navy’s newer Burkes including USS Momsen (DDG-92).

Hangar
Unsurprisingly, we’re selecting the aft helicopter hangars. Helicopters are good. I’m really not sure why early Burkes didn’t come with actual aviation facilities, but that was the decision someone in the Navy made. This puts in hangars with space for a pair of Blackhawks aft.

Sonar Systems
For our towed array, we’ll opt for the SQR-20 MFTA. It has both active and passive sonar systems, and offers improved reliability, coverage, and detection capability over the previous standard SQR-19. Bow sonar will be the SQS-53C.

Gun
I really don’t care much about the naval gun. It is not a key capability of the ship. My choices are all 5″ guns, given my constraint that I can only select from existing options. If I could put a 76mm up front to save cost and space, I would. But I can’t. So we’ll take the Mk 45 Mod 4 gun. Good enough.

That covers our standard options for our Burke. They should do well.

  1. I’m not sure if this will be used on the upcoming-production flight III ships or not. ↩
  2. Aircraft meant in the loosest possible sense of the word, so airplanes, helicopters, uavs cruise missiles, antiship missiles, et cetera. ↩

2018 IFV Roundup

Posted by

In the spirit of my revisiting of MBTs in 2018, let’s also take another look at IFVs. Happily, this field is a little more saturated, and has some interesting options available.

Of course, I’m also not about to throw away perfectly good data. The Czechs looked at ASCOD 2, Lynx, Puma and two versions of CV9030 (one with a manned turret, one with an unmanned turret). That’s most of the in-production contenders from the West. So let’s see which won what and go from there, shall we?

And then the Puma swept the competition. It had better reliability than all other test vehicles, being the only one not to have to repeat a test due to a breakdown. It has better protection than its rivals. It has better mobility than its rivals too. And, while all vehicles were armed with a 30mm gun, the Puma was significantly more accurate. The Puma had 37 hits out of 40 shots fired, and the next-best competitor did about half as well.

That’s pretty good. However, the Puma is the most expensive of the lot, and the Czechs might like to look at some other variants besides a pure IFV. They may end up buying Puma IFVs and something else for the more utility-type roles.

Of course, I wouldn’t just write a new roundup to simply say, “I agree with the Czechs.” Even though I totally do. Of the vehicles tested, the Puma has proven to be tops. Best by test. However, the Israeli Namer IFV was not in the test (certainly its present form wasn’t ready yet), and that’s worth a look. And, as always, we’re assuming both are available and marketed.

First, a brief run down of Puma. The Puma weighs 43 tonnes with all armor modules installed. Some modules can be removed to permit the Puma to make weight for transport in an A400M. It has a 30mm autocannon with 200 rounds of ready ammo, a 5.56mm1 machine gun with 1,000 rounds of ready ammo, and a two-tube launcher2 for Spike ATGMs. It has a crew of three and carries six dismounts. It has an MTU 890 V10 engine that makes about 1,100 hp. It exceeds STANAG level 6 protection on the front, meets level 6 on the sides (the highest level for KE threats), and makes STANAG 4 on the bottom against mines (confusingly, level 4 is the highest for mines). It also has an integrated soft-kill active protection system (i.e. a DIRCM). Annoyingly the STANAG levels for KE protection make no mention of what sort of shaped charge threats they can counter, and there’s no separate scale for that either.

And now for Namer. Namer weighs about 60 tonnes in its APC form, and the Israelis haven’t updated the approximation for the IFV version. It has a 30mm autocannon with 400 ready rounds, a 7.62mm machine gun with 700 ready rounds, two Spike ATGMs, and a 60mm mortar. The turret also comes equipped with the Trophy hard-kill active protection system. Namer has a crew of three and carries nine dismounts. Namer is powered by a 1,200 hp AVDS-1790 engine.

For the Namer, the Israelis haven’t released information on its protection level (and STANAG only goes up to level 6, which is merely being able to stop 30mm APFSDS), so we’ll have to guesstimate. Namer weighs about as much as a Merkava, but it lacks Merkava’s big tank turret. The Israelis say they’ve put the weight into protection, which makes sense. There aren’t many other places where that weight could go. Also, the APC version of the Namer has been shot at with Kornet missiles in Lebanon. Kornet is a modern Russian ATGM, but it was not able to penetrate the frontal armor. It did penetrate the side armor, but did not harm any of the soldiers inside. This is pretty impressive, so I’ll give a win to Namer in the protection category.

Firepower is mostly a wash. The Namer has twice as many ready rounds, but I don’t have a good notion of how many we can expect to use in an engagement before resupply. So I don’t know if it actually matters. Both have a pair of Spike ATGMs. We haven’t seen a comparative test between the two, so we don’t know if one or the other has an accuracy advantage. Namer also comes with a mortar. I’ll give it a firepower edge, conditional on the lack of head-to-head shooting competition.

In terms of mobility, the Puma is the clear winner. It has only 100 less horsepower while being several tonnes lighter. There were notions of putting the 1,500 hp MTU 883 in the Namer, but that hasn’t been done yet. We would like to look into this as well. The Puma is also easier to move to the battle by far. Again, it is lighter, and armor modules can be removed to get it in an A400M. The Namer is going to have to be transported with one’s tanks. Clear win for the Puma in both strategic and tactical mobility.

Tactical mobility is always to be prized. In the case of strategic mobility, it can also be quite useful. Here, however, I am not so sure. As I have commented previously, IFVs should operate in conjunction with tanks. Deploying tanks in quantity somewhere is going to require naval transport or rail transport or both. And if you’re already doing that for the tanks, you may as well load the IFVs on there too.

For me, this is not a hard choice. I like Puma, but I like the Namer more. I like carrying nine dismounts, and I like having as much (or more) armor on my IFVs as on my tanks. Yes it’s heavy. That’s why we call them Heavy Brigades, right?

  1. Plans have been announced to replace this with a 7.62mm MG, though they’re not finalized yet. In any case, this would be easy enough to have done. ↩
  2. Integration and testing are in progress. We’re seeing these actually on demo vehicles now which is good. Nothing like a client to move the ball faster. ↩

PMMC G5

Posted by

Despite being designed in 1960, the M113 has remained popular. It’s a big, tracked aluminum box. So it’s easy to fit stuff in. And lots of things can be put in a nice aluminum box. Lots of these, like command vehicles, mortar carriers, ambulances, and the like aren’t frontline vehicles. So the M113’s increasingly marginal protection wasn’t that much of a concern. It’s adaptable and low cost. But there’s not a lot of weight capacity for more protection if the vehicle is to be used in urban operations, and the powerplant is pretty old.

Enter FFG. FFG cut their teeth upgrading old M113s, and they finally figured they might be able to offer something better. This is the PMMC G5, seen below.

PMMC G5

The G5 is actually somewhat larger than the M113, having a payload capacity of 14.5 cubic meters, as opposed to the M113’s 8.3 cubic meters. Where the M113 can handle 2.4 tonnes of payload, the G5 can handle up to 8.5 tonnes of payload. Gross vehicle weight of the G5 is 26.5 tonnes.

The G5 also has a semimodular design. The modules have a floor and roof, plus internal stuff, and can be switched out with a crane. It’s not quite as modular as Boxer MRAV, but it’s still a solid feature.

The G5 faces stiff competition, being somewhere in between a full-featured, turretless derivative of an IFV like the CV90 Armadillo or simpler M113 refits. The PMMC G5 has only been entered into one procurement contest, in Denmark, where it lost out to the Mowag Piranha V.

As for what I think, I am a fan of the concept. Whether or not I’d go with it for Borgundy really depends on cost compared to some other options, and the sort of boring details of proposals that never gets leaked. Specifically, how the cost of a cheap additional vehicle plus spares compares to additional variants of more expensive vehicles (plus more of the spares that you’re already ordering).