Category Archives: All

A Continental Fish

Posted by

As ever, my entry in this competition is a little less well-thought-out than Parvusimperator’s. Given that I am a little less well-informed about the wider world of firearms than he is, I started with the intention to hit as many achievements as I could while still choosing things which make sense for me. So, without further ado, here are the achievements, and here’s what I’m buying.

Achievements

HIPSTER: because it’s me.
EUROTRASH: which is more or less implied by…
BEHIND THE IRON CURTAIN: I went so far as to pick one manufacturer, even.
LEATHERSLAP: I don’t know if I would actually go for this were I a real card-carrying member of the Continental, but I wasn’t able to do Heavy Metal because the BREN 2 BR isn’t available yet, so I’ll go this way instead.

The Pistol: CZ P-09 9mm Suppressor Ready (Cajun Gun Works tuning)

We’re going to start with the pistol, because that’s where I’ve been doing most of my thinking lately. It’s also a crucial piece of kit for the Continental assassin—sure, the carbine comes out now and then, but the bulk of your wet work will be done with the handgun, so it behooves you to pick a good one.

Anyway, back to the P-09. It fits my hand almost perfectly and I shoot it well. It’s a good base, and the Cajun tuning turns it into a great gun by any standard. The trigger is light and predictable, if not quite up to custom-gun snuff, but then again, we aren’t allowed to buy custom guns here anyway. The standard sights aren’t great, but they’ll do. If I weren’t doing Leatherslap, I would have Cajun mill the slide for an optic and backup sights (which adds $160).

As we say on the defense blogging side, the suppressor-ready model is fit for but not with a silencer1. It bumps the cost up, but we still get away for a Cajun Gun Works website-quoted price of $915.

Backup Gun: CZ P-07 9mm (also Cajun Gun Works tuning)

I might as well go with a familiar face here. Cajun just so happens to sell tuned P-07s, too, which have all of the virtues of the P-09 while remaining within the confines of the compact pistol style.

The Carbine: CZ BREN 2 7.62×39

Foiled in my plan to go Heavy Metal by the fact that the BREN 2 BR is not yet available in civilian trim, I had to improvise a bit. I ended up with another CZ BREN 2.

The particular model is the BREN 2 MS, which comes in pistol form in the US with a provision for attaching an AR-style buffer tube or the factory stock (not yet available on the open market). The factory stock is a side-folder, which I would prefer if the Sommelier can get it for me. If not, I’ll settle for an AR stock with a folding buffer tube adapter. In either case, it’ll add some cost—say $200, to be safe.

Why bother with folding? Well, because the BREN 2 you can buy today is technically a pistol, slapping a stock on it makes for a delightfully short-barreled rifle, and making that stock fold means you have something extremely compact—about an inch or two longer than the pistol itself. Assuming we’re going for the nine-inch barrel, that gives us an overall length in folded configuration of maybe 22 or 23 inches. You can stage that just about anywhere for your fighting retreat.

Why 7.62×39? One: because it’s me. Two: I’m on record (possibly over on Discord?) with the view that 7.62×39 can do everything a modern .30 short cartridge (.300 Blackout, I’m looking at you) can, and in vast swathes of the world, you will never find yourself hurting for ammo.

Adding our $200 in stock expenses to CZ’s MSRP, the BREN 2 tips the scales at $1,999.

The Shotgun: CZ 712 Utility

It’s a short-barreled semi-automatic shotgun. I’m not much of a tactical shotgunner, and have very little interest in shotgun sports which don’t involve shooting at aerial clay targets, so I don’t have much to say here.

Evidently, Benelli Nova tube extensions have the same thread pitch as the CZ 712’s cap, so I might have the Sommelier throw a few of those into the order, but honestly, the shotgun’s purpose in my loadout is 1) to make a big boom, and 2) to maybe blow open a locked door. It’s part of the challenge, but it’s not my thing, really. If I weren’t writing this at the last minute, I would add a bonus section on a precision rifle, which is much more my speed, but alas, time is short.

MSRP: $499.

The Knife: Gerber Truss multitool

If you have a knife you don’t know how to use, and get into a fight with someone who does know how to use a knife, you’d be just as well (poorly) served by handing him the knife before the fight starts.

I don’t really know how to use knives, so in place of a knife for fighting, I will instead elect to bring a knife for utility. Along with the traditional pliers/wire cutter tip and a variety of potentially useful screwdrivers and files, the Truss has a saw and two different knife blades, giving me some flexibility in how to cut things.

Bonus Picks: Pinching Krugerrands

Obviously, the BREN 2 is the big cost center in this loadout. If I drop it in favor of whatever complete AR-15 Palmetto State Armory has on sale this week (typically for $450 to $500) and add the classic UTG DS3840 red dot ($50), I have a $550 rifle to go with my $500 shotgun and $915 pistol, which brings me in neatly below the $2000 mark.

  1. It’s a Hollywood gunfight movie, so let’s use the classic term. ↩

Wednesday What We’re Reading (May. 8, 2019)

Posted by

Parvusimperator’s Open gun has indeed finally come in, so all we have to do is find a match which doesn’t fall on a holiday weekend.

The Continental loadout post from yesterday is a new Soapbox game, as you might have guessed from the achievements at the bottom. Mine should land tomorrow.

Headline Link: The Long Way Round

  • The story of Pan-Am’s California Clipper – En route to New Zealand at the outbreak of the Second World War, one of Pan-Am’s twelve Boeing 314 flying boats found itself cut off from its South Pacific island-hopping route. Short on fuel, spare parts, and friendly bases, its intrepid crew had to make their way back to American shores the hard way.

Has this been turned into a movie? If not, why not? Who do I call about that?

Defense

Science and Technology

Abusing Web Services

Guns

Grab Bag

Parvusimperator’s Continental Loadout

Posted by

Last week we looked at our favorite guns from the John Wick movies. This week, let’s insert ourselves in a slightly different way; choosing our own firearms for crazy Hollywood multigun battles. I’m going to go for all of the maximum performance, Open/Unlimited division guns.

Shotgun: Dissident Arms KL-12 14″ NNS
Amusingly, even though I’m not much of a shotgun guy, this was the easiest choice to come up with. Per our rules, we need a shotgun. Going with box-mag fed shotgun means we can reload without worrying about deuces and quads nonsense. The most proven box-mag fed semiautos out there are the Dissident Arms Vepr 12 builds, which are almost an entirely new shotgun. The KL-12 comes with all of the fancy extras pre-selected, including a lengthened forcing cone on the barrel, left-side charging handle, threading the barrel for (internal) chokes that can be installed and swapped with a compensator still on the barrel, replacing the iron sights with picatinny rail segments, adding an AR stock adapter, tuning the action, installing a tuned ALG trigger, adding a magwell, installing an extended mag release, and installing an extended safety. We have but a few choices to make: stock, pistol grip, cerakote color(s), compensator model, keymod or mlok handguard, and barrel length. Vepr 12s come with a 19″ barrel from the factory, but Dissident arms will happily cut that down to 16″ or 14″ and then redo the threading for the compensator if you like, pinning and welding as necessary for the NFA. A shorter barrel is handier, and we don’t give up very much in terms of reduced length in a shotgun barrel.

Our chosen options are: the Custom Arms Competition grip (with a palm shelf), XLR Industries Tac Lite stock, Dissident Arms Phoenix Comp, Mlok handguard, and a barrel cut to 14″. We’ll go with a two-color cerakote finish, with Cobalt (actually a dark grey) as the primary color and USMC Red as the accent color.

For shotgun sights, we’ll take a Vortex AMG UH-1 atop the rear sight block rail, We’ll mount a Trijicon Type 2 RMR06 a 45 degree offset mount on the dust cover rail to let us take right hand corners more easily without switching shoulders. We’re going with the big Huey for primary because I kinda like holographics, and the offset RMR because it has the nicest controls of any microdot and window size really doesn’t matter for offset long gun sights.

Carbine: Cobalt Kinetics Evolve
This one was quite a bit harder, since I like to go out and build my own rifles from carefully chosen parts. Now I need someone to do it for me, but without choosing from a giant list of options so as not to break my own rules. So let’s try to find a rifle with the premium parts I love plus some special sauce that I can’t easily do myself. And it’s gotta look really good, because this is Hollywoodland. Enter Cobalt Kinetics. Their Evolve is their flagship competition model. It has a bunch of high-end parts, including a billet matched receiver set, billet handguard matched to the upper, 16 inch Proof Research carbon-fiber wrapped barrel, Cobalt’s excellent and effective Pro compensator, a gorgeous billet aluminum pistol grip, and a billet aluminum adjustable stock. The operating system is exactly what we’d expect with an adjustable gas block, low-mass bolt carrier, and a tuneable buffer setup with a weight and spring set for that perfect recoil feel. The safety is a 45-degree throw design, and the trigger is the exceptional AR Gold. All of that is cool. The real special feature is CARS, which will automatically drop magazines when empty, and automatically send the bolt home when you insert a full mag. This can be disabled if you prefer to do all of this manually, but it can give you a bit of a speed edge. I really like it. I also like the lines of the handguard, receivers, and stock. Everything else is classic high-end carbine parts.

We don’t have much in the way of options for the Evolve: the gunsmiths at Cobalt Kinetics have already put all of their magic into it. All we get to pick are our cerakote finish colors. Again, we’ll go with Cobalt as the primary and USMC Red as the accent color. Now our longarms are color coordinated.

Sights time. This is pretty easy. While I love my Vortex, the Swarovski Z8I-BRTi 1-8×24 has two more magnification levels, has fantastic FOV and glass clarity, and even has a bright dot. We’ll grab that and mount it with Geissele’s mount, because I’m pretty fond of that mount. We’ll grab another Trijicon Type 2 RMRO6 in a 45 degree offset mount for those hard cover leans, the occasional rapid transition, and maybe as a bit of a backup.

Pistol: Limcat Stormcat
Saving the hardest for last. Of course, I wanted a fancy Open-division ready 2011 with all of the optional extras. These tend to be custom guns made to order, which is not what my rules allowed. Sigh. Limcat makes some excellent pistols that have been used by some fantastic shooters to win a whole bunch of competitions. They’ll make you something custom, or you can order a preset model. The Stormcat is Scott Greene’s model for Unlimited Division 3-gun, which we pick for its awesome features that are compatible with minor power factor (i.e factory) ammo. We have a few options to choose here. We’ll pick a caliber of 9mm, midlength “HBar” barrel, which has a tungsten sleeve, steel grip, and a medium, flat, red SVI Trigger. I do like a heavy pistol. Heavy is good. It’s a sign of reliability. And if you ever run out of bullets, you can always hit people with it.

On to the sights. We’re going with a frame mount, of course. I’m not entirely satisfied with any of the current red dot sights on the market for pistol use. I think the best choice as far as balancing durability with window size and overall mass is the Leupold Deltapoint Pro, though I’m not a big fan of its control setup. Still, it’s a really nice dot. That gives us our heavy, really high-capacity pistol with a fantastic trigger and a cool guy compensator. Plus, plenty of fancy slide cuts and a nice finish.

Backup Pistol: Glock 26 Gen 5 with TTI Combat Carry package
I really like that John Wick carries a backup pistol, so I’m gonna get one too, by Awerbuck. I’m going with the Glock 26 Gen 5 for my backup. There are smaller backups, but I like the Glock 26’s size to balance concealment and shootability. Also the Glock 26 has a solid history of reliability. I like to stick with more proven options. The Glock 26 also allows us to use the larger Glock magazines if we like, or if we find some. The Gen 5s are pretty fantastic, and I could make do with them as they come from the factory, especially given that the excellent high-visibility Ameriglo Bold sights are a factory option. But that’s not really our style. So we’ll get a complete TTI Combat Carry package. And, since an RMR cut is an option, we’ll go with that too, and a Type 2 RMR06 for our sights. Done and done.

Knife: Ban Tang Double-Edge Clinch Pick
My grandfather gave me a pocket knife for my eighth birthday, saying that every little boy should have a pocket knife. I still like knives, and I’ve spent some time studying their use. In this context, I want something for the close in fight, something that’s easy to deploy, something to give you that extra edge1 in a grappling engagement. The Clinch Pick is designed for exactly that purpose by Craig Douglas, and it fits well with his style of knife employment. Ban Tang makes a nicer version, available in single or double edge. We’ll take the double edge model.

There we have it. Super fancy guns, and they’ll look great on camera, which is important for Hollywood. They’re also gonna be really fun to shoot our way through various stag–er, Hollywood Gunfights with.

We’ve also earned ourselves the following achievements:
ONLY SHOOT OPEN
IRONS DEFICIENCY
THE MAN WITH THE GOLDEN GUNS

  1. Pun intended. ↩

Fishbreath Shoots: C-Zed Carry Optics USPSA Match Report

Posted by

You may remember that last winter, I wrote a few articles on building a Carry Optics slide for my CZ P-09 Limited gun.

Well, I finished the slide, as one of the links above indicates, made it to a range a few times to get the last few bugs worked out and the sight zeroed, and took it to the opening match of the USPSA season at Castlewood Rod and Gun Club, our favored approximately-local destination for low-pressure shooting sports1. How did it go?

Bugs

The most pressing issue discovered in testing was that the .40 S&W magazine bodies do not actually feed 9mm reliably. They appear to, and work most of the time in testing, but I ran into some issues where the last few rounds would cause trouble. The second-to-last round would sometimes pop up beyond the feed lips to make a stovepipe failure to feed, a very unusual malfunction.

There was also an issue with a wimpy sear spring causing hammer follow, but I took care of that last year at the end of the Limited season.

Practice

The first order of business was getting the sight zeroed. This turned out to be much less drama than I had expected. Parvusimperator and I popped over to our local indoor range, and while he did some drills, I set about adjusting things. Between my ballistics calculator app and my surprisingly not-rusty pistol skills, I got to a reasonable 25-yard zero pretty quickly. It shoots about an inch low at the sub-10-yard ranges you find most USPSA targets at, but is much closer to dead on for the 15-25-yard long-range targets, which is where I’d prefer the sight be the most accurate anyway.

On the second trip, in the middle of the week before the Saturday match, I did a bit of zero-refining—the point of impact was a bit to the left of the point of aim—and ran a printed-target drill parvusimperator brought along. This was also when I discovered the magazine issues mentioned above, happily leaving me enough time to pop the followers and baseplates off of the .40 magazines onto my 9mm magazines.

At the end of those two practice sessions, I was feeling fairly confident. Dots are pistol easy mode, and although I felt I had some work to do in picking up the dot on the draw, I was happy with the performance of the gun and my performance with it.

The Match: How I Shot

In short, pretty well! Finding the dot did not prove to be an issue on the clock.

On the first stage of the day, I discovered I had not screwed my battery cover in tightly enough, so the cover and battery popped out mid-stage. It was in one of Castlewood’s small bays, fortuitously, so I was able to point-shoot my way to the end with no misses. Someone found my battery cover in the mud, but not the battery, and since I had neglected to bring extra batteries2, I had to bum one off of someone else.

After that, the drama was limited. I ended up putting in stellar performances on the next two stages, good enough for the Carry Optics stage wins. I dropped some points on the classifier for taking an extra shot, too.

The gun performed perfectly, and having 23 in the magazine makes stage planning even easier than having 20, like I do in Limited configuration. I was able to complete several stages with no reload; Castlewood frequently has short stages mixed in with the long ones, which I appreciate both from a variety perspective and from a costs-less-in-bullets perspective.

The Match: Results

I was 23rd overall out of 60-some shooters, and 2nd out of 6 Carry Optics shooters (within 6% of the leader, too!). I won two stages in Carry Optics, like I said—one a moving-heavy stage with some restrictions on target engagement, one a shooting-heavy stage with a reload.

The classifier for this match happened to be the same one I shot to wrap up last year with Limited, so I can make some direct comparisons. I was a little slower this time out, in part because of penalties, and in part because of some rust on my classifier draw-and-shoot skills. Going by percentage of As shot, I was much more accurate with the Carry Optics gun, and just about as fast. I won’t know for sure until the next match, where I plan to swap the slide to get both divisions in the same day, if I’m faster with Carry Optics or Limited, but it’s definitely close enough to be in question.

I’m entirely satisfied with the outcome. I beat the shooters I was supposed to beat (those in the Lesser Divisions like Production), nearly won my division, and came out ahead of a few Limited shooters who are usually a little better than me. I was the sixth-best non-PCC non-Open shooter at the match, which is the fairest group to compare me to.

All told, the CZ Carry Optics project is an unqualified success.

  1. Except for their sporting clays course, which is brutal. ↩
  2. Well, I had extra 1620s, but the sight takes 1632s. If you’re familiar with coin cells, you will recall that the second two digits are the battery’s nominal voltage. 2V won’t run a 3.2V sight. Oops. ↩

Wednesday What We’re Reading (May. 1, 2019)

Posted by

Spring has definitively sprung here. Coming soon is the first USPSA match report of the season from me. Parvusimperator might join in on the reports a little later into the summer when his Open gun finally comes in, but at the very least we’ll be shooting matches at the same time again.

Defense

Science and Technology

History

Guns

Grab Bag

Choosing Your Own Continental Loadout

Posted by

You probably know, dear reader, that I love the John Wick movies. Well, what if I was a cool assassin working at the Continental? What would I request from the sommelier for three-gun the movie all kinds of crazy Hollywood shootouts?

As ever, let’s define some rules to keep us honest. And so that you can play along at home if you like.

1) Your loadout must include a pistol, a shotgun, and a carbine.
2) Carbines may be of pistol or rifle caliber.
3) You may include (1) backup pistol if you wish.
4) You may include (1) knife if you wish.
5) No custom weapons. As in no full house custom builds; nothing with some giant option list. Semi-custom is permitted. E.g. an Atlas Custom Pistol build is not allowed, but an Atlas Titan would be permissible.
6) The Sommelier won’t build you anything. He has better things to do.
7) You may add whatever sights you like, given that the appropriate mount is there from the factory (e.g. sight dovetails, Picatinny rail) or is being added by your specified semi-custom modder (e.g. you’ve opted for a TTI Combat Master with red dot cut for your specified sight)
8) Everything must be currently in production.

Note that I haven’t defined what constitutes a backup gun. To paraphrase Potter Stewart, I know one when I see one, and so do you. Don’t try to slip in a Glock 17 as your backup–because I’ll know.

Some bonus achievements for you to unlock: (probably more to come)
(Note that for the firearms set achievements, these only apply to your three principal weapons, not your backup gun or knife)
HIPSTER: No standard competition choices (So no Glocks, 2011s, AR-15s, Benelli shotguns)
EUROTRASH: All guns made in Europe
BEHIND THE IRON CURTAIN: All guns made in former Soviet Bloc countries
REAL AMERICAN: All guns made in USA
IRONS DEFICIENCY: All firearms have electronic sights with no backup irons on any of them
ONLY SHOOT OPEN: All firearms are only allowed in Open/Unlimited Division competition
LEATHERSLAP: All firearms have iron sights only.
HEAVY METAL: Pistol caliber: .45 ACP, carbine caliber: .308 or similar, 12 gauge pump shotgun.
PINCHING KRUGERRANDS: Total MSRP of weapons and sights does not exceed $2,000.
THE MAN WITH THE GOLDEN GUNS: Total MSRP of weapons and sights exceeds $25,000.

Comparative Red Dot Areas and Prices

Posted by

I thought I’d pull this out for reference/expansion. Original data courtesy of Fishbreath’s great post on his P-09 Carry Optics Build. It’s still sorted by mm height/$100, but it’s also a handy reference of window sizes.

For the area column, the sights are assumed to be rectangular (except for the C-More SlideRide, which is circular), which is an invalid assumption, but you get what you pay for.

Sight NameWidth (mm)Height (mm)Area (mm2)Street Pricemm height/$100
C-More SlideRide29.029.0660.52 (circle)$300 (aluminum)9.667
Vortex Viper24.017.5420.00$2307.608
Holosun 51032.023.1739.20$3107.451
Vortex Venom26.316.3428.69$2307.087
Lucid LITL MO28.019.0532.00$2806.785
Burris FastFire III21.015.0315.00$2306.522
JP JPoint21.515.0322.50$2855.263
Sig Romeo 325.021.0525.00$4005.250
C-More RTS225.022.0550.00$4205.238
Holosun 50723.116.0369.60$3105.162
Sig Romeo 130.016.0480.00$3254.923
Leupold DeltaPoint Pro25.717.5449.75$3704.730
Vortex Razor27.817.4483.72$4004.350
Trijicon SRO25.022.5562.50$5504.090
Sig Romeo 3 XL32.024.0768.00$6004.000
Trijicon RMR22.016.0352.00$5003.200

Updates:

  • 9/6/21: added Holosun 507 and 510, Sig Romeo 3 XL

The Guns of John Wick: Which Are Best?

Posted by

Inspired by a post by TTI over on Instagram, let’s look at the guns of the John Wick movies. All three of them. We’re going to compare (primary) pistols, carbines, and shotguns across all three movies. We’ll pick best by category and best movie set overall.

First, let’s talk through our ground rules. We’ll be picking as if we work at The Continental. Therefore these guns are chosen for “assassinations” (read: epic, awesome movie gunfights) and not to fit in any particular competition ruleset. Also, we pay in Magic Assassin Gold Coins, so we don’t really care what the list prices are. We also don’t get to make any changes to the guns as we see them in the movies. What the sommelier has is what we can pick from.

Second, let’s review our weapons. In the first movie, Mr. Wick is armed with an HK P30L with compensator as his primary handgun, an HK 416 clone with EoTech sight as his carbine, and a Kel-Tec KSG with EoTech sight as his shotgun. In John Wick 2, our hero has a Glock 34 that’s been tricked out by TTI as his main pistol, a TTI built custom AR-15 carbine (the TR-1) with a Trijicon Accupoint 1-6x scope and offset RMR, and a TTI customized Benelli M4 as his shotgun. His arsenal in John Wick 3 is an STI 2011 pistol that’s been customized by TTI, a SIG MPX that’s been tricked out by TTI with a Trijicon MRO red dot sight, and a Benelli M2 that (you guessed it) has been customized by TTI.

Carbine
We’ll start with carbines because that’s the easiest, and because I’m quite fond of carbines. First, we can rule out the MPX. It’s a pistol-caliber carbine, which is great for USPSA’s PCC division, but much less so combatively. 9mm is less potent than 5.56mm, and will have much more trouble dealing with armor. The MPX also has a long, NFA-compliant barrel, so we can’t even take advantage of the pistol caliber to get us something PDW-sized. Plus, the MPX has a reputation for eating parts and needing frequent cleaning. It’s in its third revision from SIG, and I don’t trust them to not beta test things on their customers. We’re left with a pair of carbines in 5.56mm. We can eliminate the HK 416 clone, because it’s got lame old quadrails, is entirely too heavy for what it is (since it has a piston and the aforementioned fat quadrails), and has the least nice sights of the three. EoTechs have that annoying tendancy to shift zero in the heat. The piston does literally nothing for us in the current configuration, and it’s probably got some stock, untuned, garbage trigger. Lame. That leaves us with the TR-1, which is also my favorite configuration of the three. It’s got a low-power variable, is reasonably light, comes in 5.56mm, and has a tuned trigger (and probably gas system/bolt carrier too).

Winner: TTI TR-1

Shotgun
The KSG is a pretty easy out, because I don’t like it, because it’s the only non-autoloader, and because Benelli’s QC and reliability are light years better than that of Kel-Tec. Also, no tuned trigger and reloads are a pain. After that, we’re looking at a tuned Benelli M4 v. a tuned Benelli M2. Were I buying the guns stock, the Benelli M2 would be the clear winner since it’s way cheaper and has a much larger aftermarket. In this case, we have them already customized. The big advantage to the M2 is some very long magazine tube extensions, but those haven’t been mounted here. Given similar capacities (and our payment in Killer Krugerrands), the differences are going to be that the M2 is somewhat lighter, being recoil operated, and that the M4 is going to be softer shooting, being gas operated (and heavier). I’m not much of a shotgun guy, so this is a toss-up. I’ll take the M4 because I’ve always wanted one and because it should shoot softer.

Winner: TTI Benelli M4

Pistol
The P30L is another easy out, because it’s got the lowest capacity and worst trigger by far of the bunch, though I do like the compensator. After that, it gets tricky because neither the TTI Combat Master Glock 34 nor the TTI Combat Master 2011 are customized in the way I’d like. But you do your job with the weapons the sommelier has. Of the two, the 2011 will have the better trigger, and will probably be a little more pleasant to shoot. So we’ll go with that. We shouldn’t really be in a position to take advantage of the Glock’s famous reliability, to the extend that it hasn’t been compromised by modifications.

Winner: TTI Combat Master 2011

Movie Winner
While we could do this as a “total up the wins” exercise, it’s more interesting to look at the weapons sets as a whole and compare them. I trust my readers can add. In terms of weapons sets, the original doesn’t have much in the way of cool custom stuff. Between the sequels, I think the shotguns are a toss up, the TR-1 is better than the MPX and the 2011 is better than the Glock. All that said, I think you’re getting more if you go with the TR-1 over the MPX than you lose with taking the custom Glock instead of the custom 2011. So my overall choice is the arsenal from John Wick 2.

Winner: John Wick 2

Honorable Mention: Backup Glock 26
No word yet on whether or not the Glock 26 backup gun has made it into John Wick 3. But it’s been his backup for two movies, with some slide work done for John Wick 2. I like when a character like John Wick actually goes to the trouble of carrying a backup gun, and the Glock 26 is an excellent choice.

Wednesday What We’re Reading (Apr. 24, 2019)

Posted by

Defense

Science and Technology

History

  • The Invention of the Salvator Mundi – On the history behind the most contentious painting attributed to da Vinci. The art world remains divided on its legitimacy, but private buyers certainly don’t—it recently went at auction for a few hundred million dollars.
  • Notre Dame burns – This link isn’t a great story. I was hoping for something with more detail on the progress of the fire and its causes. It doesn’t really count as news, either, since I’m sure you’ve heard about it already, but it was a sad day for European history1 and one worth noting.

Guns

Grab Bag

  1. Also a sad day for Christianity, but since we’re all Protestants here at the Soapbox, we don’t put nearly as much weight on the building’s shoulders. ↩

On Light Machine Guns

Posted by

The US Army has decided that they might could replace the M249 with something. Possibly. Or maybe it’s just Lucy Van Pelt with her football. Anyway, the US Army claims it wants “Overmatch”. Or something.

Overmatch

The fear is, of course, Russians (or Chinese or whoever) with level IV-equivalent body armor. Let’s think about this for a minute. Level IV hard plates are rated to stop the .30-06 M2 AP round, which is a pretty darn good steel-core AP round. And no existing round short of .50 BMG is significantly better at penetrating armor than .30-06 M2 AP; it’s actually better at penetration than both Russian 7.62x54mmR B-32 API and 7.62x51mm M61. I’m not sure how a new 6.8 mm cased telescoped round is supposed to be massively better at armor penetration than .30-06 M2 AP, unless it’s supposed to use a tungsten core. Tungsten becomes problematic once you look at the cost and where most of the world’s tungsten is mined.

It could also be some sort of Magnum 6.8mm CT round with tons of velocity, but then managing recoil becomes a huge problem. After all, steel core .30-06 is not enough, so we need more energy. More energy means more recoil, because physics is a real jerk sometimes.

Let’s also recall my usual criticisms of some sort of radically new and unproven small arms technology, which is exactly polymer-cased telescoped ammo is. We’re talking about completely new ammunition manufacturing techniques, completely new cartridges, plus massive changes in how a firearm operates. We’ll let the US Army put up and prove the stuff or shut up. Come back and talk to us in five to seven years, and then we’ll know if it’s more than the next SPIW.

Okay, so that should deal with all the WONDERCALIBER advocates. Don’t trust Big Army to buy crazy new stuff. Wait for ambitious programs to come to a conclusion. Don’t be a beta tester. Wait for bugs to get worked out. And there will be bugs.

If we’re sticking with conventional calibers and known solutions, that makes our lives a lot easier. Let’s take a brief look at squads to see how we might use the LMG. I’ve been on record before that I don’t think squad size matters too much, and I still don’t. Picking the Namer as our (Heavy) IFV of choice lets me have a nice big dismount element of nine, which makes life easy. Nine men is a pretty classical dismounted infantry squad size. Squad leader, two fireteams of four men, and one LMG per fireteam. Two LMGs in the squad is a lot of firepower, and lets either team cover the other for fire and movement if desired.

Had we gone with a smaller, more conventional IFV with a dismount team of six or seven men, I would have copied the Australians and gone with two fireteams of three men each (plus a leader in the seven-man case) and kept the two LMGs per squad. Again, fire and movement. Also, it allows for better implementation of parapet foxholes.

And now, a brief word on command. In general we’d expect the IFV commander to be in overall command, and to remain in the vehicle when the troops get out. The vehicle commander would be senior to the dismount commander.

There is the pressing matter of caliber, configuration (i.e. mag fed or belt fed), and model. Let’s take those in order. Caliber is pretty easy. It should be our usual 5.56mm to maximize bullets per pound of loadout and (therefore) volume of fire capability. It’s also a lot easier to carry, since most GPMGs aren’t workable with a single gunner (i.e. without an assistant gunner).1

And we’re going belt-fed, because we want that big ammo reserve for suppression and sustained rates of fire. Large capacity drums are bulky, heavy, annoying, and generally unreliable. They also usually have to be stowed when empty. Screw that. Belts it is, by God and John Rambo!

Belt-fed 5.56mm light machine guns. They’re super fun to shoot. We just have to pick one. For the most part, they’re all pretty similar. The one that stands out weight-wise is Knight’s LAMG, which is significantly lighter than all the rest. Which should make it a slam dunk, except that no one else has bought them. And such a massive weight savings has me nervous, since there’s no such thing as a free lunch. I have some concerns about durability, and since no one has issued them on a wide scale, no one has worked the bugs out. Again, we don’t do beta tests. So we’ll pass too. Which basically leaves a whole bunch of equivalents in FN’s Minimi/M249, HK’s MG4, IWI’s Negev, and some others that I’m forgetting. They’re all pretty much the same, and I don’t think you can go wrong. Of course, this also means that there’s not much of a reason to switch, unless you wanted to beef up your local firearms industry. Since I hate wishy-washy conclusions, I’ll go with the proven M249, mostly because it’s the only one I have any time on. It’s also been licensed to a number of other countries.

I’m sure the Wondercaliber advocates are going to ask about body armor. Well, okay. Fine. Shoot them more. It’s a belt fed. Ceramic plates are only good for a few hits. Even the multihit rated ones. You have 200 rounds in the belt. Use ’em. Also, the real killer is and always has been high explosives. 40mm grenade launchers, rocket launchers, recoilless rifles, mortars, and especially artillery. More on that in a few days.

  1. I think this might be a change from the last time I wrote on squad support weapons. It happens. ↩